Testing Equipment / Facilities

Airbag Testing Mobility Engineering is a registered test facility with the Federal Department of Infrastructure, Transport and Regional Development and Local Government (DITRDLG).

We can perform testing in accordance with Australian Design Rules (ADRs) with our state of art testing facility and equipment.

We have a large range of test equipment including the Racelogic VBOX which is used for the testing of speed accuracy, and can provide vehicle pitch, yaw, roll and can measure braking force applied to achieve a certain deceleration.

We also have a large rigid test-rig enabling us to perform various load tests such as: Seat and seatbelt anchorage tests, child restraint anchorage tests and vehicle body tests.

We are registered and have the ability to test the following Australian Design Rules (ADR’s):

1/00 – Reversing Lamps.
3/02, 3/03 – Seats and Seat Anchorages.
5/04 – Anchorages for seatbelts.
6/00 – Direction Indicators.
8/01 – Safety Glazing Material.
13/00 – Installation of Lighting and Light Signalling Devices on other than L-Group Vehicles.
14/02 – Rear Vision Mirrors.
18/00, 18/01, 18/02, 18/03 – Instrumentation.
19/02 – Installation of Lighting and Light Signalling Devices on L Group Vehicles
28/01 – External Noise of Motor Vehicles.
30/01 – Smoke Emission Control for Diesel Vehicles.
31/01 – Brake Systems for Passenger Cars.
33/01 – Brake Systems for Motorcycles and Mopeds
34/01 – Child Restraint Anchorages and Anchor Fittings
35/00, 35/01 – Commercial Vehicle Brake Systems.
42/04 – General Safety Requirements.
43/04 – Vehicle Configurations and Dimensions.
44/02 – Specific Purpose Vehicle Requirements.
45/01 – Lighting & Light-signalling Devices not covered By ECE Regulations.
46/00 – Headlamps Vol 1 & 2.
47/00 – Retro Reflectors.
50/00 – Front Fog Lamps.
51/00 – Filament Lamps.
53/00 – Front and Rear Position Lamps, Stop Lamps, Direction Indicators and Rear Registration Plate Lamps for L-Group Vehicles.
55/00 – Headlamps for Motor Cycles.
57/00 – Special Requirements for L-Group Vehicles.
61/02 – Vehicle Markings.
62/01 – Mechanical Connections Between Vehicles.
74/00 – Side Marker Lamps.
75/00 – Headlamp Cleaners.
78/00 – Gas Discharge Light Sources.
83/00 – External Noise.

Beaming and Torsion Test

testing vehicle components

Located at: 4/45 Salisbury Road, Asquith NSW 2077. Phone: 02 9482 4572

Search Engine Optimisation Brisbane by: Going Rank Australia