Mobility EngineeringMobility Engineering



Turnout Swivel Base - Electrically Operated


    The Turnout Swivel Seat is a simple but very effective system for vehicle easy access. The Turnout Swivel Seat provides access for the driver by simply rotating out the seat for a better angle to hoist the user into the seat. The great thing about this system is that it can be fitted in virtually any car, even a car as small as the Fiat 500!*

    This version of the turnout is one with an electronic motor. The seat can be turned and out with a remote control, which allows for greater convenience for you.


     
    Features of the Turnout Swivel Seat – Electrically Operated

    • Turnout E is an electrically operated swivel base that uses a remote control to allow the car seat to swivel out over the sill to facilitate entering and exiting.

    • It can be adapted to two or four-door cars and their variants, Turnout 2 and 4, can be installed on the driver or passenger side.

    • A low-level seat such as the BEV or Recaro is recommended to ensure correct seating height and maximum room when entering and exiting.

    • Crash tested and certified to the strictest European standards (adopted in Australia) with an approved user load of 150kg

    • It is mounted on a bracket that is fitted in the original seat mountings and can easily be removed when the car is replaced.

    • Turnout E can be advantageously combined with the Carony vehicle wheelchair system, which allows the seat to dock with a wheel unit.

     

    Turnout Swivel Base - Electrically Operated

    Brochure

    Read about the Carony Vehicle Wheelchair system

     





    1.                                        



    2.  




    Turnout Remote Control


    * Check with your authorised dealer.



    Located at: 4/45 Salisbury Road, Asquith NSW 2077. Phone: 02 9482 4572

    Contact Us - Homepage of Mobility Engineering

    Search Engine Optimisation Brisbane by: Going Rank Australia