Internal Hoists

Available for a wide range of vehicles, a compact design and a great solution for lifting and transporting scooters or powerchairs inside a vehicle using a hoist. 

The Curb-sider is one of the most popular means of lifting and transporting your mobility device inside a vehicle using a hoist.

Stand near the bumper or curb, connect the docking device, push a button and the Curb-sider lifts and stores a mobility device inside your vehicle with a lifting capacity of up to 181kgs.

The VSL-6900 comes with a telescopic head, that can be powered in and out.  However, the VSL-6000 model does not come with the telescopic option, but it has the ability to be installed externally, such as on a Ute tray.

The Curb-sider provides you with the independence the user deserves when travelling to and from any destination.

The key features of the Curb-sider include:

  • Power lifting, lowering, rotating for effortless operation
  • Telescopic version provides additional extension to clear bumpers and load wide mobility devices in smaller openings (VSL-9000)
  • Potential to re-install on another suitable vehicle
  • Suitable for Hatchbacks, Mini vans, Pick-up Trucks, SUV's and full size vans
  • Lifting capacity of up to 181kgs

The user requirements include:

  • Ability to walk from front to rear of vehicle and vice versa
  • Stand for 2-3 minutes
  • Adequate balance, hand dexterity and strength to attach the docking device, including bending over
  • Operate buttons on hand-held control while gently guiding mobility device into vehicle

Optional extras include:

  • Driver side replacement
  • Back-off (easily removes back of mobility device to fit into shorter vehicle openings)
  • Exterior control pendant (VSL-6000)

Download the Curb-Sider Brochure here.

 If you have any questions, or require further information on the Curb-sider, please do not hesitate to contact Mobility Engineering and speak with one of our friendly staff members.

carolift 40

The Carolift 40 is a versatile wheelchair hoist that can be used to pick up a wheelchair or rollator directly from the pavement. With the Carolift 40, packing wheelchairs into small vehicles and sedans is simple. With the wheelchair next to the vehicles boot, attach the docking device and push the up button to raise it above the bottom of the door opening, swing the lift arm into the vehicle and push the down button. The Carolift 40 consists of a jointed hoist arm taking away the manual labour of packing up your wheelchair and making the wheelchair easy to manoeuvre through narrow openings. As it has a jointed hoist arm, it is possible to pick up the wheelchair from the pavement beside the vehicle.

Features of the Carolift 40

  • It can lift up to 40kg’s
  • Jointed hoist arm
  • Power lifting/lowering with manual rotation
  • Fits most car makes/models
  • Electrically operated using the cars battery
  • Hoist is detachable from it’s mounting base
  • Hoist can be folded to the floor once the scooter is stored

Download the Carolift 40 brochure

For further information on the Carolift 40 please download the brochure above or contact Mobility Engineering and speak with one of our friendly staff members.

 

The Carolift 100 hoist was designed to be simple to use yet powerful enough to lift any wheelchair, scooter or other mobility device weighing up to 100 kg into the boot of your car. You control the hoist via an intuitive four-button hand control, and it does its job in about a minute.

Carolift 100 1


Via the hand control, the Carolift 100 hoist does all the heavy work for you. It lifts and rotates the cargo into the boot of your car. All you need to do is lend a slight guiding hand. The Carolift 100 hoist does its job very quickly. Loading or unloading your mobility device can be done in around a minute. All movement is at a smooth and constant pace, you’ll be in total control all the time.


The clever design of the Carolift 100 shines through in its ease of use. Open your boot, deploy the lift over your mobility device and lower the lift arm. Once within reach, you connect the clever lifting straps. Use as much slack as you need to fit the buckle on the mobility device. Pulling on the loop will tighten both sides simultaneously. Don’t worry if the strap is longer on one side. The Carolift 100 will self-balance the load as soon as it leaves the ground.

Carolift 100 3

FEATURES

  • Lift up to 100 kg

  • Powered lifting and electric swivel

  • Easy installation thanks to smart mounting base Operate via control on the hoist or smartphone app

  • Vehicle maintains full seating capacity

  • Suitable for most vehicle makes and models.

Carolift 100 Space

 

DOWNLOAD THE BROCHURE HERE.

carolift 140

The Carolift 140 is a versatile wheelchair hoist that can be used to pick up a wheelchair or rollator directly from the pavement. With the Carolift 140, packing wheelchairs into station wagons, minivans or full-size vans is simple. With the wheelchair next to the vehicles boot, attach the docking device and push the up button to raise it above the bottom of the door opening, swing the lift arm into the vehicle and push the down button. The Carolift 140 consists of a jointed hoist arm taking away the manual labour of packing up your wheelchair and making the wheelchair easy to manoeuvre through narrow openings. As it has a jointed hoist arm, it is possible to pick up the wheelchair from the pavement beside the vehicle.

Features of the Carolift 140

  • It can lift up to 140kg’s
  • Jointed hoist arm
  • Power lifting/lowering with manual rotation
  • Suitable for station wagons, minivans or full-size vans
  • Electrically operated using the cars battery
  • Hoist is detachable from it’s mounting base
  • Hoist can be folded to the floor once the scooter is stored
  • Can be cut to optimize the storage of different vehicle shapes

Download the Carolift 140 brochure

For further information on the Carolift 140 please download the brochure above or contact Mobility Engineering and speak with one of our friendly staff members.

R11 Robot

Independently stowing and retrieving your wheelchair has never been easier with the help of the R11 Robot! A mechanical arm assists the driver by collecting the wheelchair from the drivers side door, and lifts it safely into the boot of the car. When the driver is ready the arm can return the seat to point in was collected from.


Fortunately, since the R11 Robot is stored in the back of the vehicle, it keeps the interior space tidy and free to use by any passengers. Sensor technology prevents the mechanical arm from colliding with obstructions and it only requires a small amount of space to manoeuvre over and past nearby vehicles. It can lift a chair that weighs up to 22 kg, however can be enhanced to lift up to 30kg.

 

 


The R11 Robot does not require permanent modifications to the vehicle and can be transferred from one car to the next, meaning the driver can use the product for as long as they need without worrying about the purchase of a new vehicle.

Download the R11 Robot Brochure here.

Benjamin Hoist

The Benjamin is the smallest hoist in the B&S program and designed to lift up wheelchairs and small scooters up to 25 kg into the trunk of a car. The Benjamin has a lift arm that can be taken out and can laid down in the trunk when the hoist is not used.

Benjamin lift 006

David / David XL

The David wheelchair hoist is the most popular hoist in the B&S program, designed to stow wheelchairs and small scooters up to 58 kg into the boot of a car. The David wheelchair hoist is available in various designs:

  • Fixed liftarm or foldable liftarm
  • Manual or electric rotation
  • Lifting capacity 42 kg (David) or 58 kg (David XL)

David 2018 002VB

 

Janus XS / Janus Hoist

Janus 1

The Janus hoist is a special version of the Benjamin and David hoists. This model hoist has a rotating head on top of the liftarm, which makes the length of the liftarm variable. The wheelchair or scooter can be picked-up and lifted further behind the car and more accurately positioned in the boot. The Janus wheelchair hoist is a reasonable solution, especially for cars with a wide rear bumper.

Janus XS: lifting capacity 25 kg, fixed liftarm

Janus: lifting capacity 42 kg,fixed or foldable liftarm

 

Samson XS / Samson Hoist

For wheelchairs and scooters up to 115 kg, B&S developed the Samson wheelchair hoist. The Samson is available in different versions: fixed liftarm / foldable liftarm and manual / electric rotation. The lifting capacity is 84 kg for the Samson XS or 115 kg for the Samson model.

Samson

 

Hercules / Hercules XL Hoist

A wheelchair or scooter up to 185 kg is no problem for the B&S Hercules wheelchair hoist. This very strong hoist is perfect for stowing electric wheelchairs and powerscooters into various vehicle types. The Hercules wheelchair hoist has a fixed liftarm and can be supplied in a manual or electric rotated version. The lifting capacity of the Hercules wheelchair hoist is 150 kg or 185 kg for the Hercules XL.

 

 

Hercules met hijslepel

 

Goliath Hoist

Goliath ingebouwd1

The B&S Goliath wheelchair hoist, with a lifting capacity of 200 kg, is the most powerful wheelchair hoist that is available. The Goliath is equipped with a very strong metal chain that capable of hoist some of the heavier mobility devices on the market. The Goliath wheelchair hoist has a fixed lift arm and can be supplied with manual or electric rotation.

Share this page with your network:

Hoisting and Stowing

Creating Connections
Unlocking potential
Growing People's Worlds.